| Assessment Questions: 115 results |
Acids_and_Bases : PercentDissociationKa (3 Variations) Calculate the percent dissociation in a {x}M aqueous solution of the weak acid HA. (Ka = {y} x 10-4)
Enter your answer to ONE decimal place. DO NOT use scientic notation. DO NOT write in the units.
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
Equilibrium
|
Acids_and_Bases : WeakAcidSolnpH (20 Variations)
Given an aqueous solution of 0.30 M acetic acid (Ka = 1.8 x 10-5), the pH is approximately ...
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : BufferingCapacity (20 Variations) If a buffer is prepared using 0.75 mol CH3COOH and 0.45 mol CH3COO- in 1 liter of aqueous solution, is the buffering capacity of the solution great enough to maintain its pH if 10 g NaOH is added?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : pHDilution (6 Variations)
What is the pH of a solution made by diluting {x} mL of {y} M HNO3(aq) to a total volume of 500 mL?
Enter your answer to two decimal places.
DO NOT use scientific notation
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : pHBufferCalc (4 Variations)
Calculate the pH of a buffer solution containing {x}M NH3 and {y}M NH4NO3.
Enter your answer to TWO decimal places.
DO NOT use scientific notation.
DO NOT enter units
eg: 4.55
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : BufferWeakStrong (7 Variations) How many mL of a 2.50 M HCl solution must be added to 500 mL of a 0.150 M CO32- solution to make a buffer with pH = 10.00?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : CalcSolnpH (5 Variations)
Use this acid/base table to answer the question below.
Calculate the pH of a {x}M sodium acetate solution.
DO NOT use scientific notation
Enter your answer to two decimal places.
DO NOT enter units
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Acids_and_Bases : BufferWeakWeak (14 Variations) What mass of potassium bicarbonate (KHCO3) must be added to 500 mL of a 0.200 M carbonic acid solution to make a buffer with pH = 6.30?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH |
Equilibrium
|
Equilibrium : CommonIonEffect (9 Variations)
The molar solubility of lead(II) fluoride (PbF2) is
2.1 x 10-3 mol/L in pure water at 25oC. What is the molar solubility of lead(II) fluoride in 0.10 M NaF at 25oC? (Assume that the only relevant reaction is the solubility-product equilibrium.)
Equilibrium |
Chemometrics
|
Equilibrium : ConcFromKsp (8 Variations)
The Ksp of BaF2 is
1.7 x 10-6 mol/L in water at 25oC. What is the concentration of barium ions in equilibrium with solid barium fluoride? (Assume that the only relevant reaction is the solubility-product equilibrium.)
Equilibrium |
Chemometrics
|
Equilibrium : InterpretKsp (16 Variations)
Which of the following salts would give you the highest concentration of phosphate ions in solution if you placed 1 mole of the salt in a liter of water?
Equilibrium |
Chemometrics
|
Equilibrium : EqConstRelationships (12 Variations)
The equilibrium constant for the reaction of hydrogen gas and ethene to produce ethane under certain conditions is 9.8 x 1018.
H2(g) + C2H4(g)
C2H6(g) K = 9.8 x 1018
What is the equilibrium constant for the following reaction under the same conditions?
C2H6(g)
H2(g) + C2H4(g) K = ?
Equilibrium |
Chemometrics
|
Equilibrium : CalcMolesAtEquil (15 Variations)
The following reaction has an equilibrium constant of 0.083 at 900oC.
COCl2(g)
CO(g) + Cl2(g)
If you have 1.00 mole of COCl2(g) in a 1.00L container initially, how many moles of COCl2 will be present when the system reaches equilibrium?
Equilibrium |
Chemometrics
|
Equilibrium : EqConstConcData (4 Variations)
SbCl5(g)
SbCl3(g) + Cl2(g)
You have 0.50 mol SbCl5 present initially in a 1.0L flask. The system is allowed to reach equilibrium at 450oC. There is 0.10 mol Cl2 present at equilibrium. What is the equilibrium constant, K?
Equilibrium |
Chemometrics
|
Equilibrium : CalcRxnQuotient (13 Variations) In an experiment, 4.44 mol of SO2, 7.93 mol of O2 and 4.03 mol of SO3 are placed in a 2.0L reaction vessel at a certain temperature. Calculate the reaction quotient, Q, for the reaction as written:
What is the calculated reaction quotient, Q? {2:NUMERICAL:=2.1e-1:1e-2#Correct! ~%50%2.1e-1:5e-2#Close but not quite right}
If Kc for this reaction at the temperature of the experiment is 3.7 x 103, will the reaction move toward the left or toward the right? {1:MULTICHOICE:left#Sorry, that's wrong.~=right#Correct!}
Equilibrium |
Chemometrics
|
Equilibrium : CalcKp (2 Variations)
In one experiment chemists studied the formation of phosgene, COCl2, by mixing {y} atm of carbon monoxide and {z} atm of Cl2 in a reaction vessel at 700K. After the system reached equilibrium, the total pressure was {x} atm. Calculate Kp for the reaction.
Hint: Remember that the total pressure is the sum of all the partial pressures.
Note:
Do Not use scientific notation
DO NOT use spaces
DO NOT write in the units.
Be sure to write your answer with only one decimal place even if this is not the correct number of significant figures.
Equilibrium |
Chemometrics
|
Equilibrium : CalcKc (4 Variations)
A container initially has {y} M ammonia at a certain temperature. When the system reaches equilibrium the concentration of ammonia is {x} M. Calculate Kc for the following reaction as written.
Note:
Answers must be written using scientific notation with "e"
DO NOT use spaces
DO NOT write in the units.
Be sure to use three significant figures.
eg: 2.44e-5
Equilibrium |
Chemometrics
|
Equilibrium : ConvertKcKp (6 Variations) Nitrosyl bromide is formed from nitrogen oxide and bromine:
Kp for this reaction is {x} at {y}°C. Calculate Kc at this temperature. (R = 0.0821 L atm/mol K)
Note: DO NOT use scientific notation Use integers (no decimal places) even is this is not the correct number of significant figures. DO NOT write in the units. eg: 18
Equilibrium |
Chemometrics
|
Equilibrium : MoreMolesAtEquil (19 Variations)
The following reaction has an equilibrium constant of 0.050 at a given temperature.
N2(g)+ O2(g)
2NO(g)
If you have 0.75 moles of N2(g) and 0.75 moles of O2(g) in a 2.0L container initially, how many moles of N2 will be present when the system reaches equilibrium?
Equilibrium |
Chemometrics
|
Reactions : StrongWeakAcidBase (10 Variations) Which of the following are strong acids?
Acids / Bases
|
Reactions : AcidBaseRxns (20 Variations) In order to answer the following questions, write the net ionic equation for the reaction between equal volumes of 0.10 M solutions of the following acid and base:KOH(aq) + HBr(aq) What are the reaction products? Does the reaction yield an acidic, basic, or neutral aqueous solution?
Acids / Bases |
Reactions |
pH
|
Acids_and_Bases : LewisAcidBaseRxns (19 Variations) Identify the Lewis Acid and Base in the reaction of Ag+ and NH3 to form Ag(NH3)2+
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
Lewis Acids / Bases
|
Aldehyde and Ketone Addition (2 Variations) A collection of 2 assessment questions about Aldehyde and Ketone Addition
Aldehydes / Ketones |
Acids / Bases |
Reactions
|
Acids_and_Bases : IonizationSteps (20 Variations) Citric acid (which is a triprotic acid) has the following structure:
Which of the following equations corresponds to the first ionization step of the acid?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : MolcScaleAcidBase (10 Variations)
Study the four drawings below and then decide which best represents an aqueous solution that has
(Water molecules are not shown in the diagrams.)

Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : ConjugateAcidBase (20 Variations) Identify the acid and base that are reactants and the conjugate acid and conjugate base that are products in the following equation: HI(aq) + H2O(l) H3O+(aq) + I-(aq)
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : HendersonHassel (20 Variations) You may want to use the following acid/base table to answer the question below.
Papain is a thiol protease isolated from papaya. The optimal pH for its enzymatic activity is 6.0-7.0. Which of the following buffering systems would work best for a laboratory experiment requiring active papain at pH 6.5? What molar ratios of the compounds would you use to prepare the solution?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : IDLewisAcidBase (20 Variations) Which of the following is a Lewis acid?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : ReactProductFavored (20 Variations) You may want to use the following acid/base table to answer the question below.
Which of the following reactions will be product -favored?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : WeakStrongAcidPics (11 Variations) Which diagram best represents an aqueous solution of HCl? (Water is not shown.) 
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : ChooseIndicator (8 Variations)
A 25.0 mL aliquot of a 1.44M solution of ammonia (Kb = 1.8 x 10-5) is titrated with 1.50M HCl. Use the Indicator Table below to decide which of the indicators listed would most accurately signal the equivalence point for this titration.
Write the letter corresponding to your choice of indicator in the box.
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH
|
Acids_and_Bases : SolnGrams (20 Variations) How many grams of sodium hydroxide (NaOH) must be dissolved in 510 ml of water to make a solution with a pH = 8.1?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
pH
|
Acids_and_Bases : ProtonTransferRxn (20 Variations)
Write an equation to describe the proton transfer that occurs when the following acid is added to water: HSO4-
Enter the products in the space below using the following as an example:
What ions are present in an aqueous calcium nitrate solution?
Ca(NO3)2(aq) Ca2+(aq) + 2NO3-(aq)
In this case, the answer would be: Ca2+(aq) + 2NO3-(aq)
You should enter: Ca^(2+) + 2NO3^(-)
In other words, use the ^ to indicate superscripts; put charges in parentheses; and leave a space on either side of the + sign. Your answer must be an exact match for the computer to grade it correctly, so be careful.
What products will result when HSO4- is added to water?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
AcidBaseProducts (10 variations) The following acid/base table may be useful in answering the question below.
What products will result when HSO4- is added to water? Complete and balance the reaction below. HSO4- + H2O ?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : AcidBaseProperties (10 Variations)
Which of the following are properties of HCl?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Acids_and_Bases : AcidicOrBasicSalt (20 Variations) When dissolved in an aqueous solution, which of the following salts will yield an acidic solution?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry
|
Equilibrium : EquilTrueFalse (4 Variations)
Which of the following statements is a true statement concerning a reaction that has reached a state of equilibrium?
Equilibrium
|
Equilibrium : KspExpressions (10 Variations)
What is the solubility product expression for Ag3PO4?
Equilibrium
|
Equilibrium : KspSaturation (12 Variations)
Zn(OH)2 has a Ksp of 4.5 x 10-17. If you have a solution of Zn(OH)2 that has a hydroxide ion concentration equal to 4.6 x 10-6 mol/L, the solution is ... (Assume that the only relevant reaction is the solubility-product equilibrium.)
Equilibrium
|
Equilibrium : LeChatPrinciple (18 Variations)
Consider the following equilibrium, established in a 2 L flask at 30oC.
CO(g) + H2O(g)
CO2(g) + H2(g)
H0= -41.2 kJ
What will happen to the concentration of CO2 if the temperature is increased?
Equilibrium
|
Equilibrium : RxnDirectAndTemp (16 Variations)
2 SO2(g) + O2(g)
2 SO3(g)
The reaction above has an equilibrium constant of 0.25 at 830oC, and Horxn = -197.78 kJ/mol under standard conditions. Under which conditions will this reaction produce the most sulfur trioxide?
Equilibrium
|
Equilibrium : EquilExpressions (15 Variations)
What is the correct equilibrium constant expression for the balanced reaction shown below?
C3H8(g) + 5O2(g)
3CO2(g) + 4H2O(l)
Equilibrium
|
Equilibrium : InterpretEqConsts (12 Variations)
The following reaction has an equilibrium constant of 1.2x1018 at 25oC.
CH4(g) + Cl2(g)
CH3Cl(g) + HCl(g)
Which of the following statements is true?
Equilibrium
|
Equilibrium : ICETables (16 Variations) 2C2H2(g) + 5O2(g) 4CO2(g) + 2H2O(g) You have 0.4 moles C2H2 and 0.2 moles O2 present initially in a 5L flask. You allow the reaction to run until it reaches equilibrium. Which of the following is the correct ICE table for this process?
Equilibrium
|
Equilibrium : SolubilityPressTemp (16 Variations)
How does increasing the temperature change the solubility of nitrogen in water?
Equilibrium
|
Matter_and_Measurement : NumOfSigFigs (4 Variations) How many significant figures will the answer to the following problem contain?

Chemometrics
|
Acids_and_Bases : TitrationCurveKaKb (8 Variations) Study the graph of the titration of a weak acid with a strong base shown below. What is the approximate Ka for this acid? 
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
Titration / Volumetric Analysis
|
Acids_and_Bases : PracticalAcidBase (20 Variations) Which of the following statements is true?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
Physical Properties
|
Acids_and_Bases : WaterAutoIonization (20 Variations)
What effect will the addition of H2CO3 have on the autoionization of water?
Acids / Bases |
Reactions |
Aqueous Solution Chemistry |
Water / Water Chemistry
|
Acid Base (44 Variations) A collection of 44 assessment questions about Acid Base
Acids / Bases |
Carboxylic Acids |
Alcohols |
Phenols |
Reactions |
Alkanes / Cycloalkanes |
Aldehydes / Ketones |
Esters |
Alkenes |
Alkynes |
Amines / Ammonium Compounds |
Ethers |
Lewis Acids / Bases |
Amides |
Amino Acids
|
Aldol Reactions (30 Variations) A collection of 30 assessment questions about Aldol Reactions
Aldehydes / Ketones |
Esters |
Amides |
Carboxylic Acids |
Mechanisms of Reactions |
Acids / Bases |
Reactions |
Synthesis |
Elimination Reactions |
Resonance Theory
|
Equilibrium : EquilAndRxnRates (8 Variations)
For the reaction of A B, which of the following statements about the rates of forward and reverse reactions is true at time x?

Equilibrium |
Kinetics
|
Amino Acids (10 Variations) A collection of 10 assessment questions about Amino Acids
Amino Acids |
Stereochemistry |
Acids / Bases |
Amines / Ammonium Compounds |
Carboxylic Acids |
Nucleic Acids / DNA / RNA |
Proteins / Peptides |
Synthesis |
Aldehydes / Ketones
|
Carboxylic Acids (14 Variations) A collection of 14 assessment questions about Carboxylic Acids
Carboxylic Acids |
Acids / Bases |
Esters |
Amides |
Reactions |
Synthesis |
Grignard Reagents |
Ethers |
Oxidation / Reduction |
Alkenes |
Heterocycles |
Amines / Ammonium Compounds |
Aldehydes / Ketones
|
Covalent Bonding (11 Variations) A collection of 11 assessment questions about Covalent Bonding
Carboxylic Acids |
Acids / Bases |
Resonance Theory |
Covalent Bonding |
Phenols |
Amines / Ammonium Compounds |
Free Radicals |
Alkenes |
Amides |
Ethers
|
Phenols and Aryl Halides (9 Variations) A collection of 9 assessment questions about Phenols and Aryl Halides
Phenols |
Acids / Bases |
Reactions |
Alcohols |
Amines / Ammonium Compounds |
Carboxylic Acids |
Aromatic Compounds |
Ethers |
Alkylation |
Synthesis |
Esters |
Electrophilic Substitution
|
Gases : GasGramMixPressure (5 Variations)
4.80 g of CH4 is mixed with 17.6 g of CO2 in a 9.00 L flask at a temperature of 67.2oC. What is the total pressure of the flask? (Assume there is no reaction.)
Gases |
Chemometrics
|
Gases : GasMoleMixPressure (5 Variations)
What is the pressure exerted by a mixture of gases in a 40.0 L container at 127oC if the mixture contains 0.100 mol O2, 0.400 mol CH4, and 0.500 mol SO2?
Gases |
Chemometrics
|
Gases : GasRxnVolumes (10 Variations)
A gas phase reaction takes place in a syringe at a constant temperature and pressure. If the initial volume before reaction is 30 mL and the final volume after the reaction is complete is 15 mL, which of the following reactions took place? (Note: You can assume that you start with stoichiometric amounts of the reactants, the reaction goes to completion and that the gases behave ideally.)
Gases |
Chemometrics
|
Gases : IdealGasLaw (11 Variations)
What volume is occupied by 2.60 moles of nitrogen at 1.70 atm and 14.9oC?
Gases |
Chemometrics
|
Gases : GasLaws (2 Variations)
Note: This is a calculation type question. If you exit the quiz without submitting it and you do not save an answer before exiting the quiz, the values in the question may change when you enter the quiz again.
You purchase a propane tank that can hold gas safely up to a pressure of {x} atm. When the tank contains 100. grams of propane at {y}°C, the gas exerts a pressure of {z}atm. What is the highest temperature to which the propane can be heated safely? (Report your answer in Kelvins.)
Gases |
Chemometrics
|
Gases : IdealGasMolarMass (10 Variations)
A sealed flask contains 3.1 L of a gas at 2.4 atm and 22.7oC. If the density of the gas is 9.7 g/L, what is its molar mass? (You can assume that the gas behaves ideally.)
Gases |
Chemometrics
|
Gases : OzoneMolcsFromppm (10 Variations)
Although ozone is an important component of the upper atmosphere, long-term exposure to ozone in the air we breathe can cause inflammation of the lung, impairment of lung defense mechanisms, and irreversible changes in lung structure. The EPA has set an 8 hour limit for ozone of 0.08 ppm as an air quality standard for cities. At the EPA limit, how many ozone molecules are present in 5.0 liters of air at 25oC and 0.967 atm? (Hint: assume that air is an ideal gas and calculate the total number of molecules there are in 5.0 L. Then use the definition of ppm.)
Gases |
Chemometrics
|
Kinetics : ArrheniusActEnergy (4 Variations)
The rate constant for the first-order dehydration of tert-butyl alcohol at 500oC is 1.20 x 10 -4 s -1. The rate constant for this process at 600oC is 6.80 x 10 -3 s -1. Calculate the activation energy for this reaction in kJ/mol. (R = 8.314 J/mol K)
Kinetics |
Chemometrics
|
Kinetics : ArrheniusRateConst (4 Variations) CH3CH2NO2 C2H2 + HNO2 Using the graph below, calculate the rate constant for this reaction at 40.0oC.

Kinetics |
Chemometrics
|
Kinetics : ArrheniusTemp (3 Variations)
The activation energy for the isomerization of cyclopropane to propene is 274 kJ/mol. By what factor does the rate of reaction increase as the temperature rises from 500oC to 550oC assuming all else remains constant? (R = 8.314 J/mol k)
Hint: This is asking for the ratio of rates which is proportional to the ratio of the rate constants, all else being equal.
Kinetics |
Chemometrics
|
Stoichiometry : CalcPercentYield (8 Variations)
When copper is heated in air, copper(II) oxide is formed. In a given experiment, 1.50 g copper was heated to yield 1.76 g copper(II) oxide. What is the percent yield?
Stoichiometry |
Chemometrics
|
Stoichiometry : CalcWeightPercent (8 Variations)
What is the weight percent of oxygen in LiHCO3?
Stoichiometry |
Chemometrics
|
Kinetics : ExpDataRateConst (16 Variations) Use the experimental data below to determine the rate constant for the following reaction.
Kinetics |
Chemometrics
|
Thermodynamics : CalcDeltaG (14 Variations) Using , calculate the Gibbs free energy change for the following reaction which produces the metal zinc from its ore zinc(II) oxide. 2 ZnO(s) 2 Zn(s) + O2(g)
Thermodynamics |
Chemometrics
|
Thermodynamics : CalcDeltaS (9 Variations) Using , calculate the entropy change for the reaction.

Thermodynamics |
Chemometrics
|
Thermodynamics : CalcMinSpontTemp (9 Variations) Calculate the minimum temperature above which the following reaction will be product-favored (spontaneous).

Thermodynamics |
Chemometrics
|
Thermodynamics : DetermineRxnFavored (8 Variations) When industrial plants burn coal, sulfur dioxide is produced. Sulfur dioxide is a primary pollutant that contributes to both industrial smog and acid rain. Is this process of producing sulfur dioxide product-favored?
 Using 
Thermodynamics |
Chemometrics
|
Thermodynamics : GibbsFromHSandT (5 Variations)
On the space shuttle, the carbon dioxide produced by the astronauts is handled by an environmental control system that utilizes the following reaction.

H° = -138.4 kJ and S° = -139 J/K
Calculate G° at 25°C for this reaction.
Thermodynamics |
Chemometrics
|
Gases : GasRxnStoich (10 Variations)
One of the reactions in the process of obtaining very pure silicon for the microelectronics industry is shown below. If 24 g of SiO2 is reacted with an excess of carbon, what volume of gaseous carbon monoxide will be produced at a temperature of 17oC and a pressure of 735 mm Hg?
SiO2(s) + 2C(s) Si(S) + 2CO(g)
Gases |
Chemometrics
|
Stoichiometry : CalcTheorYield (10 Variations)
If you react 6.2g of phosphine with 8.30g of oxygen, what is the theoretical yield of phosphorous pentaoxide?
4PH3 + 8O2 P4O10 + 6H2O
Stoichiometry |
Chemometrics
|
Stoichiometry : CalcWtPercent (6 Variations) A standard dose of antacid as a calcium supplement is two tablets. The active ingredient in many of these tablets is calcium carbonate. One tablet, having a weight of 1.415 g, is reacted with excess HCl(aq) to produce 0.22 g CO2. What is the weight percent of calcium in this tablet? CaCO3(s) + 2HCl(aq) CaCl2(aq) + H2O(l) + CO2(g)
Stoichiometry |
Chemometrics
|
Stoichiometry : CalcPercentPurity (4 Variations)
To test the purity of calcium sulfate, you dissolve a 4.56g sample in water and add oxalic acid to precipitate out calcium oxalate. If 3.45g of precipitate forms, what is the percent purity of the calcium sulfate?
CaSO4(aq) + H2C2O4(aq) CaC2O4(s) + H2SO4(aq)
Stoichiometry |
Chemometrics
|
Amines (30 Variations) A collection of 30 assessment questions about Amines
Amines / Ammonium Compounds |
Synthesis |
Acids / Bases |
Reactions |
Amides |
Electrophilic Substitution |
Stereochemistry |
Carboxylic Acids |
Oxidation / Reduction |
Aldehydes / Ketones |
Alkanes / Cycloalkanes |
Dyes / Pigments |
Grignard Reagents
|
Bonding (34 Variations) A collection of 34 assessment questions about Bonding
Molecular Properties / Structure |
Covalent Bonding |
IR Spectroscopy |
VSEPR Theory |
Aromatic Compounds |
Lewis Structures |
Resonance Theory |
Aldehydes / Ketones |
Carboxylic Acids |
Acids / Bases
|
Organometallic (13 Variations) A collection of 13 assessment questions about Organometallic
Organometallics |
Grignard Reagents |
Epoxides |
Alcohols |
Esters |
Alkanes / Cycloalkanes |
Aldehydes / Ketones |
Synthesis |
Ethers |
Aromatic Compounds |
Reactions |
Carboxylic Acids |
Alkenes |
Amines / Ammonium Compounds |
Acids / Bases |
Alkynes
|
Matter_and_Measurement : CompareFCTemps (10 Variations) Which is the higher temperature, 350oC or 350oF?
Chemometrics |
Nomenclature / Units / Symbols
|
Matter_and_Measurement : ConvertUnits (10 Variations) Your textbook is approximately 8.75 inches by 10.25 inches. What are these measurements in centimeters?
Chemometrics |
Nomenclature / Units / Symbols
|
Matter_and_Measurement : UseDensity (10 Variations) If a 10.0 inch aluminum skillet weighs 3 pounds, how many cm3 of aluminum does it contain? The density of aluminum is 2.70 g/cm3.
Physical Properties |
Solids |
Chemometrics
|
Solutions : IonConcentration (4 Variations) Which of the following solutions has the greatest concentration of Na+ ions?
Solutions / Solvents |
Chemometrics
|
Solutions : MassSoluteInSoln (10 Variations) What is the mass of the solute in 500mL of 0.341M ammonium chloride?
Solutions / Solvents |
Chemometrics
|
Solutions : SolnConcAfterMixing (4 Variations) 10 mL of 0.1 M BaCl2(aq) is mixed with 10 mL of 0.1 M AgNO3(aq). What are the concentrations of the ions in the final mixture?
Solutions / Solvents |
Chemometrics
|
Solutions : SolnPrepByDilution (10 Variations) For the analysis of trace metals it is necessary to prepare solutions of very low concentrations from a stock solution of higher concentration using a micropipet and a volumetric flask. What volume of a 0.0010 M solution of Zn(NO3)2 (aq) would be required to prepare a 5.0 nM solution of Zn2+ in a 250mL flask?
Solutions / Solvents |
Chemometrics
|
Solutions : SolnPrepByMass (4 Variations) You are required to prepare 5 L of a solution containing 1.000 x 10-3 mol/L of Cu2+(aq). Which of the following procedures would produce an appropriate solution?
Solutions / Solvents |
Chemometrics
|
Stoichiometry : ExplainYldError (4 Variations)
Your TA gives you an aqueous solution containing an unknown quantity of AgNO3(aq) and an unknown quantity of Mg(NO3)2(aq). You are asked to determine the molarity of Ag+ in the solution. You add HCl(aq) to your unknown to precipitate the silver as AgCl(s), then filter out the precipitate, dry it, weigh it, and calculate the concentration of silver ion. However, your TA tells you that your calculated value of [Ag+(aq)] is lower than the actual value. Which of the following could account for your answer being too low? There may be more than one correct answer.
Stoichiometry |
Reactions |
Chemometrics
|
Stoichiometry : PrecipYield (3 Variations)
In a laboratory experiment to determine accurately the amount of barium in solution, aqueous sulfuric acid was added to the solution to precipitate barium sulfate, which was then filtered and weighed. In this experiment it is MOST important that ...
Stoichiometry |
Reactions |
Chemometrics
|
Thermochemistry : BombCalorimeter (4 Variations)
Stearic acid (CH3(CH2)16CO2H) is a fatty acid, the part of fat that stores most of the energy. 1.00 g of stearic acid was burned in a bomb calorimeter. The bomb had a heat capacity of 652 J/oC and a 500. g water reservoir. If the temperature rose from 25.0 to 39.3 oC, how much heat was released when the stearic acid was burned?
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : CalcHStateChange (4 Variations)
Calculate the enthalpy change when 100. g of ice at 0.0 oC is heated to liquid water at 50.0oC. (The heat of fusion for water is 333 J/g.)
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : CoffeeCupCalorimeter (2 Variations)
A block of copper is heated to {x} °C and then is dropped into a coffee cup calorimeter containing {y} g of water at 25.0 °C. The final temperature of the system is 45.1 °C. What is the mass of the copper block to the nearest gram? (Assume all heat is transferred to the water). Write your answer in the box, and do NOT include units.
Specific heat capacity of copper = 0.383 J/(g*°C)
Specific heat capacity of water = 4.18 J/(g*°C)
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : FuelAmpWattHeat (4 Variations)
Gasoline has an enthalpy of combustion of approximately 24000 kJ/gallon. When gasoline burns in an automobile engine, approximately 30% of the energy released is used to produce mechanical work. The remainder is lost as heat transfer to the engine's cooling system and eventually the atmosphere. As a start on estimating how much heat transfer is required, calculate what mass of water could be heated from 25 to 100oC by the combustion of 1.0 gallon of gasoline in an automobile.
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : CalcHBondEnergy (14 Variations) Use the bond energies given in to estimate the Ho for the reaction given below:
 hint: both carbon dioxide and molecular oxygen have double bonds
Calorimetry / Thermochemistry |
Chemometrics
|
Kinetics : InitialRateMethod (16 Variations) Use the experimental data below to determine the rate equation for the following reaction.
Kinetics |
Chemometrics |
Rate Law
|
Thermochemistry : CalcHCombustion (6 Variations) Using the thermodynamic data given in , determine the enthalpy change for the combustion of ethane to produce carbon dioxide and water vapor. 2C2H6(g) + 7O2(g) 4CO2(g) + 6 H2O(g)
Calorimetry / Thermochemistry |
Chemometrics
|
Matter_and_Measurement : ConversionFactor (4 Variations) Which conversion factor is needed to complete the dimensional analysis for the following problem?
It costs $3 per package of 10 pairs of socks. How much does 2 pairs of socks cost?

Chemometrics |
Nomenclature / Units / Symbols
|
Thermochemistry : EnthalpyEnergy (10 Variations)
2SO2(g) + O2(g) 2SO3(g)
Horxn = -197.78 kJ
How much energy is transferred when 96.6 g of SO2 reacts to form SO3?
Calorimetry / Thermochemistry |
Chemometrics
|
Stoichiometry : GivenYieldCalcStMat (4 Variations)
Calcium oxide and water are produced by heating calcium hydroxide. If the reaction has an expected yield of 60%, how much calcium hydroxide should be reacted to produce 115g of calcium oxide?
Ca(OH)2 CaO + H2O
Stoichiometry |
Reactions |
Chemometrics
|
Stoichiometry : MolsO2ToReactFuel (10 Variations)
Butane can be used as a fuel. How many moles of oxygen are needed to completely react with 3.0 moles of butane?
The unbalanced reaction equation is given below:
C4H10(g) + O2(g) CO2(g) + H2O(g)
Stoichiometry |
Reactions |
Chemometrics
|
Stoichiometry : RxnMolsProduced (8 Variations)
Given the following balanced chemical reaction:
4A + 3B2 2A2B3
If 12 moles of A are reacted with excess B2, how many moles of A2B3 will be produced?
Very carefully enter the number below.
Stoichiometry |
Reactions |
Chemometrics
|
Thermodynamics : ATPFromGlucose (8 Variations)
When glucose is oxidized in the human body it releases a lot of Gibbs free energy. Rather than waste this free energy, the body stores much of it in the form of ATP. The following reaction shows this process of storing some of the energy from glucose in ATP. This is an example of coupled reactions in a biological system.

The label on a can of Coke says that it contains 39 g of sugar. Assume that all of the sugar is glucose (even though it isn't), and calculate how many moles of ATP can be produced theoretically by the oxidation of 39.0 g of glucose.
Thermodynamics |
Reactions |
Chemometrics
|
Stoichiometry : GivenMassCalcStMat (10 Variations) Aspirin is a common analgesic. If you want to produce 250. mg of aspirin (C9H8O4) from the reaction of C7H6O3 and C4H6O3, what is the minimum amount of C7H6O3 that is needed? 2C7H6O3(s) + C4H6O3(l) 2C9H8O4(s) + H2O(l)
Stoichiometry |
Reactions |
Chemometrics
|
Stoichiometry : RxnTable (10 Variations) Iron reacts with oxygen to form iron(III) oxide according to the following reaction.
4Fe(s) + 3O2(g) 2Fe2O3(s)
|
Fe(s)
|
O2(g)
|
Fe2O3(s)
|
| Initial Amount
|
-
|
-
|
-
|
| Change
|
-
|
-
|
-
|
| End Amount
|
-
|
-
|
-
|
Complete the reaction table for a reaction mixture containing 12.0 moles of iron and 10.0 moles of oxygen, and select the true statement(s) from following list.
Stoichiometry |
Reactions |
Chemometrics
|
Stoichiometry : SolnStoich (4 Variations) You are working in a forensic lab and are given a blood sample from a suspected drunk driver and asked to determine the person's blood alcohol level. The legal limit is 0.08% by mass in most states. You use the following reaction in your determination, assuming only the ethanol (C2H5OH) in the blood sample will react with the dichromate. 16H+(aq) + 2Cr2O72-(aq) + C2H5OH(l) 4Cr3+(aq) + 11H2(l) + 2CO2(g)
If 14.6 mL of 0.10 M K2Cr2O7 are needed to react completely with 28 g of blood, what is the blood alcohol level of the driver?
Stoichiometry |
Reactions |
Chemometrics
|
Thermochemistry : CalcHHessLaw (8 Variations)
The industrial process for making sulfuric acid has three steps. Using the data given, calculate the enthalpy change for the overall reaction for the process (the equation is given below).2S(s) + 3O2(g) + 2H2O(l) 2H2SO4(l)
Data:
S(s) + O2(g) SO2(g)
| Hrxn = -296.83 kJ
|
2SO3(g) O2(g) + 2SO2(g)
| Hrxn = -198.2 kJ
|
SO3(g) + H2O(l) H2SO4(l)
| Hrxn = -227.72 kJ
|
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : MassFromCalorimetry (2 Variations) The table below lists the specific heat capacities of several metals and liquids. | Substance | Specific Heat Capacity J/(g.oC) | Substance | Specific Heat Capacity J/(g.oC) | | Al | 0.902 | H2O | 4.18 | | Fe | 0.451 | C2H5 OH | 2.46 | | Cu | 0.383 | CCl4 | 0.861 | | Au | 0.128 | CCl2F2 | 0.598 |
In an experiment a block of aluminum was heated to 100oC and placed in 200 g of water at 25oC. If the final temperature of the system is 43oC, and no heat transfer to the surroundings occurred, what is the mass of the aluminum block?
Calorimetry / Thermochemistry |
Chemometrics
|
Thermochemistry : CalcMolarEnthalpy (5 Variations)
White phosphorus, P4, ignites in air to produce heat, light, and P4O10 according to the following reaction. P4(s) + 5O2(g) P4O10(s) If 67.2 g of P4 is burned,1620 kJ of energy is evolved. What is the molar enthalpy of combustion of P4 if the process was carried out under constant pressure?
Calorimetry / Thermochemistry |
Chemometrics
|
Solutions : ConvertConcUnits (10 Variations) The maximum concentration of arsenic in drinking water that is allowed by the EPA is 0.050 mg/L. Express this as a weight percent. (You can assume the density of the water solution is 1.0g/mL.)
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
|
Solutions : GramsToMolalSoln (20 Variations) How many grams of citric acid need to be added to 750 ml of ethanol to make a 0.50 m solution?
|
|
Density (g/ml)
|
Molecular Weight (g/mol)
|
|
Citric acid
|
1.665
|
192.14
|
|
Ethanol
|
0.7893
|
46.07
|
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
|
Solutions : WtPercentToMolarity (4 Variations)
A common concentration unit used commercially is percent weight per volume (%W/V) which is the number of grams of solute in 100 mL of solution. A bottle of vinegar contains 5 %W/V acetic acid (CH3COOH). What is the molar concentration of acetic acid in the vinegar?
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
|
Thermodynamics : EntropyPhaseChange (13 Variations)
Aluminum can be evaporated in a vacuum to form highly reflective coatings. Aluminum boils at 2792K and has a heat of vaporization of 70.0 kcal/mol. Calculate the entropy change for the vaporization of one mole of aluminum.
Thermodynamics |
Chemometrics |
Phases / Phase Transitions / Diagrams
|
Solutions : CalcMolarityFromPPT (10 Variations) You are given a water sample to analyze from a lake contaminated with lead. It takes 24 mL of 0.020 M NaCl to exactly precipitate the Pb2+ ions from 61 mL of the water sample. What is the concentration of Pb2+ ions in the water? Pb2+(aq) + 2NaCl(aq) PbCl2(s) + 2Na+(aq)
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
|