TIGER

Assessment Questions: 19 results
Solutions : MixturesMolcPics (11 Variations)
Which of the following combinations of substances corresponds to the molecular scale diagram shown below?

Solutions / Solvents |
Noncovalent Interactions |
Precipitation / Solubility
Solutions : FreezePtDepression (20 Variations)
It takes 6.86 kg of ethylene glycol (antifreeze) to decrease the freezing point of 6.50 kg of water to -25.0oF (-31.7oC). How much sodium chloride (NaCl) would it take to decrease the freezing point of 6.50 kg of water to -25.0oF? (Assuming all the salt will dissolve in that amount of water.)
Solutions / Solvents
Solutions : GeneralSolutions (10 Variations)
You have 500.0mL of 0.100M aqueous MgBr2. Which of the following statements are true?
Solutions / Solvents
Solutions : SolnPrepProcedure (10 Variations)
You want to prepare 250mL of a 0.0150M solution of KCl. Which of the following procedures would give you the best results?
Solutions / Solvents
Solutions : SolutionNanoPics (4 Variations)
The drawings below represent flasks of aqueous solutions. Each pink dot represents a dissolved solute particle.
Which of the following solutions is most concentrated?

500 mL
Solution A
500 mL
Solution B
500 mL
Solution C
250 mL
Solution D
250 mL
Solution E
250 mL
Solution F


Solutions / Solvents
Solutions : IonConcentration (4 Variations)
Which of the following solutions has the greatest concentration of Na+ ions?
Solutions / Solvents |
Chemometrics
Solutions : MassSoluteInSoln (10 Variations)
What is the mass of the solute in 500mL of 0.341M ammonium chloride?
Solutions / Solvents |
Chemometrics
Solutions : RelativeConc (4 Variations)
What are the relative concentrations of the ions in 0.10 M aqueous sulfuric acid?
Solutions / Solvents |
Stoichiometry
Solutions : ReverseOsmosis (20 Variations)
You are given a water sample that contains ammonium chloride (NH4Cl). You determine the concentration of the salt to be 0.500 M and decide to purify the water using reverse osmosis. What is the minimum pressure that must be applied at 30.0oC to force the water through the membrane?
Solutions / Solvents |
Transport Properties
Solutions : SolnConcAfterMixing (4 Variations)
10 mL of 0.1 M BaCl2(aq) is mixed with 10 mL of 0.1 M AgNO3(aq). What are the concentrations of the ions in the final mixture?
Solutions / Solvents |
Chemometrics
Solutions : SolnPrepByDilution (10 Variations)
For the analysis of trace metals it is necessary to prepare solutions of very low concentrations from a stock solution of higher concentration using a micropipet and a volumetric flask. What volume of a 0.0010 M solution of Zn(NO3)2 (aq) would be required to prepare a 5.0 nM solution of Zn2+ in a 250mL flask?
Solutions / Solvents |
Chemometrics
Solutions : SolnPrepByMass (4 Variations)
You are required to prepare 5 L of a solution containing 1.000 x 10-3 mol/L of Cu2+(aq). Which of the following procedures would produce an appropriate solution?
Solutions / Solvents |
Chemometrics
Solutions : ConvertConcUnits (10 Variations)
The maximum concentration of arsenic in drinking water that is allowed by the EPA is 0.050 mg/L. Express this as a weight percent. (You can assume the density of the water solution is 1.0g/mL.)
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
Solutions : GramsToMolalSoln (20 Variations)
How many grams of citric acid need to be added to 750 ml of ethanol to make a 0.50 m solution?

Density (g/ml)

Molecular Weight (g/mol)

Citric acid

1.665

192.14

Ethanol

0.7893

46.07


Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
Solutions : WtPercentToMolarity (4 Variations)
A common concentration unit used commercially is percent weight per volume (%W/V) which is the number of grams of solute in 100 mL of solution. A bottle of vinegar contains 5 %W/V acetic acid (CH3COOH). What is the molar concentration of acetic acid in the vinegar?
Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
Solutions : CalcMolarityFromPPT (10 Variations)
You are given a water sample to analyze from a lake contaminated with lead. It takes 24 mL of 0.020 M NaCl to exactly precipitate the Pb2+ ions from 61 mL of the water sample. What is the concentration of Pb2+ ions in the water?
Pb2+(aq) + 2NaCl(aq)PbCl2(s) + 2Na+(aq)

Solutions / Solvents |
Nomenclature / Units / Symbols |
Chemometrics
Reactions : Solubility (8 Variations)
Which of the following compounds are soluble in water?
Aqueous Solution Chemistry |
Precipitation / Solubility
Reactions : ExchangeRxn (10 Variations)
Which of the following compounds would result in an exchange reaction if mixed in an aqueous solution with Ba(OH)2?
Aqueous Solution Chemistry |
Reactions |
Precipitation / Solubility
Reactions : IDSampleRxnVideo (7 Variations)
You have an unknown aqueous sample. You add aqueous copper(II) sulfate to the sample. View the video below and determine which of the compounds listed below could be your sample.


Aqueous Solution Chemistry |
Reactions |
Precipitation / Solubility